Product category:
Printing Trade Organisations - including Allied Industry Bodies
News Release from: British Printing Industries Federation | Subject: ISO 12647-2, GRACoL7 colour standards
Edited by the Printingtalk Editorial
Team on 26 July 2006
Colour Test Methods Prove To Be Close
Match
Two different methods of implementing the ISO 12647-2 standard printing conditions came under the microscope at a UK colour testing day.
Two different methods of implementing the ISO 12647-2 standard printing conditions came under the microscope at a UK colour testing day The event was organised by the newly reformed British Printing Industries Federation (BPIF) technical standards committee at Heidelberg UK's Brentford showroom
This article was originally published on Printingtalk on 1 Aug 2005 at 8.00am (UK)
Related stories
BPIF Website Eases Understanding Of Complex VAT
The British Printing Industris Federation (BPIF) has added to the range of resources on its website with a new VAT advice page for members.
BPIF Climate Levy Saves £4.5m But More Can Benefit
The BPIF has reported that its Climate Change Levy Reduction Scheme has saved printers over £4.5 million every year since 2001.
Led by committee chairman and White Horse Press joint managing director, Peter Arnel, the purpose of the event was to conduct methodology and printing tests using both the Fogra and IDEA Alliance GRACoL G7 methods.
That allowed delegates to appreciate how the two separate methods are applied and to assess colour quality and appearance by comparing the printed results together as produced by both systems.
In his introduction and welcome to the 50 people present, Peter Arnel expressed concerns over the variable colour standards found within the industry and encouraged the general adoption of ISO 12647-2 by printers to address that.
Further reading
Compensation For Lured Employees Looks Remote
A UK Court of Appeal decision this month appears to restrict even further a company's ability to recover compensation from a competitor who entices away its key employees.
BPIF Launches Unlimited Legal Advice For Members
Digital Print World (DPW) will see the launch of the British Printing Industries Federation's (BPIF) new commercial law service, Legal Plus.
Report Reveals Need For Radical Technology Shifts
Nearly 70 printers and suppliers to the printing industry took time out yesterday to hear the findings of a new British Printing Industries Federation (BPIF)-Pira research study.
Also presenting on the day were Dan Wilson, the first European-based colour consultant to be accredited by IDEAlliance (developers of the GRACoL) to implement the GRACoL7 method, and Paul Sherfield of the Missing Horse Consultancy, who developed the test forms and co-ordinated the event.
All the printing tests were conducted on a Heidelberg Speedmaster CD 74 -10 colour press running with a specified colour sequence of black, magenta, cyan and yellow.
A colour test form was designed and prepared to incorporate both the Fogra and GRACoL7 control bars.
In addition, GRACoL7 also included a series of multi-tone grey scales.
The test form contained five duplicate examples of halftone four-colour process images of demanding subjects, from the Altona visual test suite, separated to both Forga 27 and G7 for comparison and assessment purposes.
The first task of the Heidelberg print technician was to obtain the press fingerprint information from the test form by achieving the specified standard colour densities on the solid patches across the sheet, which were read and confirmed by the Heidelberg Image Control traversing colour spectrophotometer.
Eric Koldenhof from Colorware in the Netherlands used his company's Pressview software to also validate the sheets to the Fogra 27 printing conditions, whilst Paul Sherfield also checked the sheets manually using a Gretag Macbeth Spectro Eye.
From that data it was possible using the Fogra colour control bars to calculate the amount of press dot gain so that the Heidelberg pre-press technicians could produce new corrected plates.
Analysing the recorded information it is said to be possible to alter the initial colour curves, for instance in calculating a dot gain allowance for all future four-colour halftone separations for that particular press.
The GRACoL7 method requires the detailed analysis and calibration of the multi-tone grey scales.
From the data it is possible to plot two curves CMY and black to achieve a specified grey balance.
From the data the colour curves can be adjusted, which are then sent to the RIP of the CTP device prior to output new colour corrected plates.
Both of those approaches require appropriate measuring equipment, such as a colour spectrophotometer, which must be accurately calibrated to be able to measure the colour values correctly.
The captured colour data is then used to adjust the setting of the curves within the CTP RIP so that an accurate representation of the original and the proof can be printed.
Whilst the essential calibration work was in progress Dan Wilson presented the GRACoL7 approach to implementing ISO 12647-2.
He explained that both Fogra and GRACoL7 used the same L a.
b.
colour space values although it was suggested in practice that some small correction to the existing L a.
b.
values could lead to a benefit for printers.
However, as the GRACoL7 system used a series of multi-tone grey scales for calibration purposes and any variation away from the grey specification could be adjusted using the combined CMY and black curves.
Making adjustments to the two curves was not directly linked to dot gain but in effect to achieve the corrected grey colour values the halftones would be changed.
Under the direction of Heidelberg colour management specialists, Mikki Winn and Steve Fowler, two further sets of plates were made following the initial calibration work.
In turn both sets of plates with the Fogra ISO curve and the GRACoL7 were printed on the Heidelberg 74 CD press.
When both sets of printed sheets were subject to close comparison the colour and appearance of the two tests results were remarkably close, which indicated whatever method favoured by printers to calibrate the press using either the conventional Fogra or the GRACoL7 approach both could achieve the ISO 12647-2 standard.
Finally, a set of plates containing the five test images, separated to Fogra 27, (from both the ECI ICC profile and the Adobe Fogra 27 profile from CS2) a beta profile from GRACol G7 data, and a Beta profile from Fogra 39 data, were produced from both calibrations and printed.
Peter Arnel concluded: "There was general agreement amongst the delegates present that when assessing the results of the four-colour process printed images produced by the two differing methods both achieved the conditions of the standard.
Fundamentally there was very little to choose between the Fogra and the GRACoL7 approach to achieving the specified ISO 12647-2 colour standard." BPIF national technical adviser, Peter Vincent, commented: "It was very encouraging to see such a large turnout from the industry including colour specialists, industry suppliers, printers and print management companies.
The BPIF strongly supports standards and best practice and, above all, consistency of approach within colour management.
The feedback from the day was very encouraging.".
• British Printing Industries Federation: contact details and other news
• Email this article to a colleague
• Register for the free Printingtalk email newsletter
• Printingtalk Home Page
Search the Pro-Talk network of sites
