Product category:
Printing Pre-Press Systems and Materials (Repro, Platemakers, CTP, Workflow, Document Management, Design Software, etc.)
News Release from: Fuji Photo Film (UK) | Subject: The Brillia LH-PSE CTP Thermal Printing Plate
Edited by the Printingtalk Editorial
Team on 06 June 2003
A positive plate you can burn in
A new positive-working CTP thermal plate for CTP exposure systems
The Graphic Arts System Division of Fuji Photo Film (Europe) GmbH has developed a new positive-working CTP thermal plate for CTP exposure systems The 'Laser Heat-Positive Standard Europe', LH-PSE for short, supplements the offerings which are currently available
This article was originally published on Printingtalk on 4 Feb 2004 at 8.00am (UK)
Related stories
Drupa Will See Fujifilm's Cause Celebra
Drupa 2004 will see Fujifilm release its next generation Celebra Extreme PDF, digital printing, digital proofing and CTP workflow systems.
In contrast to the LH-PIE positive thermal printing plate, the LH-PSE can be burned in.
The new construction of the sensitive layer requires the use of LH-DS developer and a new replenisher, LH-DSR; this means that it cannot be used along with the LH-PIE in the same developing machine.
All developing machines in the FLH-P line can be used to process the LH-PSE, without any limitations.
Processors in the FLH-N line must be retrofitted with an additional brush roller in the rinse section.
The LH-PSE is currently available in thicknesses of 0.15 mm, 0.20 mm, 0.30 mm und 0.40 mm, and other formats can be special-ordered.
The price per square meter and other conditions of sale are the same as those of the LH-PIE.
• Fuji Photo Film (UK): contact details and other news
• Email this article to a colleague
• Register for the free Printingtalk email newsletter
• Printingtalk Home Page
