Product category:
General Print Supplies, Services for Printers
News Release from: Maxson Automatic Machinery Company | Subject: Cut to Register sheeter
Edited by the Printingtalk Editorial
Team on 07 August 2007
Machine's Accurate Sheets For
Converters, Printers
The new Cut to Register sheeter gives converters and commercial printers accurate sheeting to a registration mark on a variety of pre-printed materials.
The Cut to Register sheeter is claimed to run at speeds of up to 1,000 feet per minute (308 metres per minute) According to Maxson, the Cut to Register sheeter performs equally well on holographic stock
This article was originally published on Printingtalk on 7 Mar 2007 at 8.00am (UK)
Related stories
Sheeter Handles Coated Film At High Speeds
Manufacturers of coated film plastic can now sheet the product at higher speeds than conventional drop shear equipment, ensuring the square, accurate dimensions required by the printing industry.
It utilises a roll stand with line guidance capabilities, a scanner to detect registration marks and an electronic drive system that holds the cut tolerance to within +0.006 of an inch (+0.15mm) of the register mark regardless of line speed or cut-off.
The drive provides an offset parameter to position the cut from the mark, whilst the sheeter also has manual operator over-ride and programmed rejection of out of tolerance lengths.
Maxson added that the sheeter can be outfitted with a 'continuous run' feature that avoids stopping the unit when making skid changes.
That permits the sheeter to be put in-line with a printing press.
Available in widths up to 65" (1,651mm) the Cut to Register sheeter has a repeat of between 11" - 65" (280mm - 1,651mm) long.
• Maxson Automatic Machinery Company: contact details and other news
• Email this article to a colleague
• Register for the free Printingtalk email newsletter
• Printingtalk Home Page
Search the Pro-Talk network of sites
